ENDOINJECTOR - Nitrex
Search
Close this search box.

- ENDOINJECTOR -

ENDOINJECTOR

ENDOINJECTOR

ENDOTHERMIC / EXOTHERMIC GENERATOR CONTROL SYSTEM

The EndoInjector™ is a precision gas mixing and control system for endothermic gas generators. The system incorporates a patented fuel injection design that utilizes electronic flow measurement and precise ratio control to consistently produce the ideal gas mixture for high quality endothermic gas generation. The fuel injection design automatically delivers gas mixture on demand, providing only as much endothermic gas as your furnaces require. This design feature makes it possible to significantly reduce operating costs and eliminate gas waste. Designed to easily replace existing carburetor/pump designs, the EndoInjector™ typically pays for itself in under a year.

EXOTHERMIC GENERATOR CONTROL SYSTEM

The ExoInjector™ is a precision gas mixing and control system designed specifically for exothermic gas generators. The system incorporates a patented fuel injection design that utilizes electronic flow measurement and precise ratio control to consistently produce the ideal gas mixture for high quality exothermic gas generation.

While similar in concept, the ExoInjector™ is different from the EndoInjector™ in that it comes in modified mechanical versions to accommodate premix or nozzle mix burners with a custom HMI software that allows for predefined ratio setpoints for burner ignition, rich exo-, and lean exothermic gas. Furthermore, the system can be modified for hydrogen content control and water vapour monitoring to ensure the furnace atmosphere is consistent and recorded for repeatable results over time.

Documents

FEATURES & BENEFITS

  • Full-colour touchscreen
  • Integrated dew point control
  • Integrated temperature control
  • Ratio controller
  • Fuel-injection control valve
  • Integrated paperless chart recorder (5+ yr. data storage)
  • Large turndown capability
  • Reduce operating costs
  • Touchscreen control interface
  • Minimize generator setup/startup time
  • Electronic air flow meter
  • Electronic gas flow meter
  • Mixing blower
  • Relief valve
  • Air inlet filter
  • Eliminate gas waste
  • No lubrication required
  • Precision dew point control
  • Eliminate soothing of catalyst due to mistuned carburetors

SYSTEM CHARACTERISTICS

Control power110/220 VAC @ 50/60Hz
Blower power230/460 VAC 3 Phase
Capacity100-6,000 CFH (Standard)
100-14,000 CFH (Extended)
Turndown5:1 (or greater)
Min gas pressure +2.5 PSIG (Standard)
+0.5 PSIG (LP Model)
Max gas pressure5 PSIG All Models
Max operating temp180°F
Communication ports232/485/Ethernet
ProtocolModbusRTU
Ports2” NPT (unless otherwise specified)
Gas typesPropane or Natural Gas

Still Have questions?

Can’t find what you’re looking for? Please feel free to get in touch with our experts.