- Meets NFPA requirements
- Infield calibration verification
- Integrated precise motorized control valve
- No moving parts for the flow measurement
- Integrated touchscreen display
- Integrated Flow Alarm
- Integrated Flow Totalizer
- Multipoint calibration
ELECTRONIC FLOW-CONTROLLER
The FurnaceMeter™ Flow Controller is based on our standard FurnaceMeter precision flow meter series, utilizing our proprietary differential pressure flow measurement design.
For accurate control of flow, these meters are fitted with integrated motorized control valves specifically designed for the gas type, inlet pressures, and scale ranges to provide precision process control.
Power requirements: | No power required |
Ambient Temperature: | 32°-150°F |
Max Inlet Pressure | 2 PSI (Standard Model) |
40 PSI (HP Model) | |
250 PSI (HPX Model) | |
Flow Accuracy: | ± 4% |
Repeatability: | 2% |
Flow Output Signal (linear): | 4-20MA or RS-485 |
Flow Control Signal (linear): | 4-20MA or RS-485 |
Flow Output Signal: | SPDT Relay |
Turndown: | 15-100% |
*Calibration is referenced to standard atmospheric conditions: (70°F, 14.7 PSIA)
CHARACTERISTICS | STANDARD OPTION | HP OPTION |
---|---|---|
Scale: | To Order | To Order |
Turndown: | 10:1 | 10:1 |
Accuracy: | +/- 4% | +/- 4% |
Max Pressure: | 5 psig | 80 psig |
Max Temperature: | 130°F | 130°F |
Power: | 24VDC | 24VDC |
Flow Signal: | 4-20mA | 4-20mA |
Control Signal: | 4-20mA | 4-20mA |
Flow Switch: | Yes | Yes |
Comms Serial: | RS-485 | RS-485 |
Protocol: | ModBUS-RTU | ModBUS-RTU |
Ethernet Port: | TCP/IP | TCP/IP |