Menü
Home > UPC-Marathon >
There’s a good reason why the heavy-duty NX Pit is the flagship of our range of nitriding/nitrocarburizing furnaces. Its innovative design incorporates multiple controlled heating zones that ensure optimal temperature uniformity inside the retort, typically +/-5 °C (9 °F) or better. NX furnaces are designed for fast heating rates and uniform temperature throughout the load.
To discuss your nitriding and nitrocarburizing furnace requirements, please fill out our “Request a Quote” form.
| Model | Diameter | Height | Load Capacity |
|---|---|---|---|
| NX-615 | 23½”(600 mm) | 59"(1500 mm) | 2200 lb. (1000 kg) |
| NX-620 | 23½”(600 mm) | 78¾”(2000 mm) | 2600 lb. (1200 kg) |
| NX-815 | 31½”(800 mm) | 59"(1500 mm) | 3300 lb. (1500 kg) |
| NX-820 | 31½”(800 mm) | 78¾”(2000 mm) | 3850 lb. (1750 kg) |
| NX-825 | 31½”(800 mm) | 98½"(2500 mm) | 4400 lb. (2000 kg) |
| NX-1015 | 39"(1000 mm) | 59"(1500 mm) | 4400 lbs (2000 kg) |
| NX-1020 | 39"(1000 mm) | 78¾”(2000 mm) | 5500 lb. (2500 kg) |
| NX-1025 | 39"(1000 mm) | 98½"(2500 mm) | 6600 lb. (3000 kg) |
| NX-1215 | 47¼”(1200 mm) | 59"(1500 mm) | 6600 lb. (3000 kg) |
| NX-1220 | 47¼”(1200 mm) | 78¾”(2000 mm) | 8400 lb. (3800 kg) |
| NX-1225 | 47¼”(1200 mm) | 98½”(2500 mm) | 9900 lb. (4500 kg) |
| NX-1230 | 47¼”(1200 mm) | 118"(3000 mm) | 11570 lb. (5250 kg) |
| NX-1625 | 61"(1550 mm) | 98½”(2500 mm) | 13200 lb. (6000 kg) |
| NX-1630 | 61"(1550 mm) | 118"(3000 mm) | 15400 lb. (7000 kg) |
| NX-1635 | 61"(1550 mm) | 137¾”(3500 mm) | 17600 lb. (8000 kg) |
| NX-1645 | 61"(1550 mm) | 177"(4500 mm) | 22000 lb. (10000 kg) |
NOTE: Nitrex reserves the right to make changes without notice.
For non-standard sizes, please contact Nitrex
NITRIDING/NITROCARBURIZING SIMPLIFIED
The Nitrex process control system is a product of extensive R&D in process automation and enables accurate process execution and consistent results. The entire nitriding/nitrocarburizing process is automatic, self-adjusting and operator-independent.
This expert system monitors and responds to changes in nitriding conditions by regulating the following parameters and operating functions:
ENJOY PEACE OF MIND
With our “set and forget” process, the user selects the desired recipe from a library of researched and tested recipes and initiates a process. From there, all stages of the nitriding cycle (e.g., purge, heat, process control, cool) are automatically sequenced in one uninterrupted cycle, without further operator intervention. This setup provides a high degree of accuracy in process execution, contributing to consistent nitriding/nitrocarburizing results.
AVAILABLE TECHNOLOGIES:
Can’t find what you’re looking for? Please feel free to get in touch with our experts.
