- NITROCARB -

NITROCARB

NITROCARBURIZING SENSOR 

NitroCarb™ is a vacuum-tight oxygen sensor for nitrocarburizing processes. A fully gas-tight design, coupled with low-temperature operation and a special sheath, allows the NitroCarb™ to work in all FNC environments where other probes simply cannot. 

The Inconel 600 Sheath is vented to prevent accumulated moisture during high dew-point heat ups. Electrode design is tailored to nitrocarburizing temperatures up to 550°C (1022°F). Probe also provides a signal to the control instrumentation to calculate the Kc potential. 
  

From: $1,996.00

Clear Options

Accessories

CABLE NitroCarb

From: $212.00

SKU N/A

Clear Options
Category:

Additional information

Weight N/A
Dimensions N/A
LENGTH

1', 10', 20', 30', 40', 50'

T/C TYPE

K, K with 1/4" Reference Air Tube, K with 6mm Reference Air Tube, None, RS, RS with 1/4" Reference Air Tube, RS with 6mm Reference Air Tube, with 6mm Reference Air Tube

Flowmeter 0.2-2.0 SCFH

$75.00 US

SKU F960000

Category:

Additional information

Weight 1 lbs
Dimensions 7 × 5 × 5 in

Flowmeter 2-20 SCFH

$82.00 US

SKU F960070

Category:

Additional information

Weight 1 lbs
Dimensions 7 × 5 × 5 in

Furnace Probe Reference Air System

$1,215.00 US

SKU BO-REF

Category:

Additional information

Weight 11 lbs
Dimensions 20 × 16 × 10 in

PROBE BUDDY SIMULATOR

$1,295.00 US

SKU PB-S

Oxygen probe simulator & tester

 

Additional information

Weight 5 lbs
Dimensions 14 × 10 × 7 in

Probe Burnoff Reference Air System

$1,819.00 US

SKU BO-REF - R4

Category:

Additional information

Weight 15 lbs
Dimensions 20 × 16 × 10 in

CONSTRUCTION

  • Ventilated sheath
  • Solid Zirconia electrolyte
  • Vacuum-tight, sealed head
  • High temperature alloy sheath
  • All stainless-steel connection fittings

 

APPLICATIONS

  • Capable of measurement and control of nitrocarburizing atmospheres when used in conjunction with H2Smart™ hydrogen analyzer
  • Measurement and control of pre- and post-oxidation processes

Additional information

Weight N/A
Dimensions N/A
LENGTH

20'' / 527 mm, 26''/ 680 mm, 32'' / 820 mm

T/C TYPE

K, None, R, S

Output in a heat treating atmosphere 1000 to 1200 mV DC
MIN operating temp 800°F [425°C]
MAX operating temp 1200°F [650°C]*SEE WARRANTY CARD*
Sensor head temp 200 °F max.
Sensitivity 0.02 mV or .0025% C
Accuracy ±0.03% C
Stability ±1 mV over sensor life
Response time Less than 1 second
Impedance Less than 6 K ohm
Sensor construction Stabilized zirconia solid electrolyte; patented alloy electrode
Thermal shock Caution is advised, obey installation & removal procedures
Sensor Life About 2 years with normal use
Warranty 1 year usage, non-prorated
Serviceability No field service required, rebuildable at factory
Reference air requirement 0.2 to 0.5 MAX SCFH filtered air *See Reference Air Installation*