- CARBONSEER -

CARBONSEER

TOUGH DESIGN AND SATURATION BURN-OFF FOR HIGH CARBON APPLICATIONS

The industry’s most popular, work-horse carbon probe. Alloy protection tube for versatility and ruggedness. Accepted as an industry standard, around the world.

From: $1,720.00

Clear Options

Accessories

Flowmeter 0.2-2.0 SCFH

$75.00 US

SKU F960000

Category:

Additional information

Weight 1 lbs
Dimensions 7 × 5 × 5 in

Flowmeter 2-20 SCFH

$82.00 US

SKU F960070

Category:

Additional information

Weight 1 lbs
Dimensions 7 × 5 × 5 in

Furnace Probe Reference Air System

$1,215.00 US

SKU BO-REF

Category:

Additional information

Weight 11 lbs
Dimensions 20 × 16 × 10 in

PROBE BUDDY SIMULATOR

$1,295.00 US

SKU PB-S

Oxygen probe simulator & tester

 

Additional information

Weight 5 lbs
Dimensions 14 × 10 × 7 in

Probe Burnoff Reference Air System

$1,819.00 US

SKU BO-REF - R4

Category:

Additional information

Weight 15 lbs
Dimensions 20 × 16 × 10 in
  • Available in multiple insertion lengths up to 38″ (964mm)
  • 00″ diameter sheath eliminates probe sag problems found on competitor probes – no need to periodically rotate the probe in order to prevent failure
  • Can be inserted up to 10″ inside the furnace – no 4″ limit as found on smaller diameter products
  • Genuine RA330 alloy sheath – we don’t substitute with cheaper alloys like the competition!
  • “K”, “R”, and “S” integral thermocouples are available
  • Fast probe burn-off (90 seconds) and rapid recovery time
  • Probe electrical disconnect allows for simple replacement
  • Strain-relief grommet for direct-to-terminal wiring

Additional information

Weight 15 lbs
Dimensions N/A
LENGTH

20'' / 527 mm, 30'' / 756 mm, 32'' / 820 mm, 40'' / 1016 mm, 48'' / 1200 mm

T/C TYPE

K, None, R, S

Carbon Potential Range- 0.10% to 1.4%
Output in normal heat treating- 1000 to 1200 mV DC
Normal sensor operating temp.- 1400 to 1850°F **
Sensor cover temp limit- 200OF max.
Sensitivity- 0.02 mv or .0025% C
Accuracy- ±0.03% C
Stability- ±1 mv over probe life
Response time- Less than 1 second
Impedance- Less than 6 K ohm
Sensor construction- Stabilized zirconia solid electrolyte; patented alloy electrode
Sensor thermal shock- Caution is advised, outer alloy sheath protects ceramic zirconia tube.
Sensor Life- About 2 years with normal use
Warranty- 1 year usage, non-prorated
Serviceability- No field service required, rebuildable at factory with substantial savings
Reference air requirement- 0.2 to 1.0 MAX SCFH filtered ambient air
** minimum operating temp 1150 °F