Poland

• Nitreg Nitriding: aluminum extrusion lines, automotive components, connecting rods, guides, injection molds, forging dies, thread chasers, etc.
• Converting, carbonitriding and Quenching
• Electroless Nickel
• High Vacuum Treatment
• Quenching & Tempering
• Tenifer Nitriding
• Wearing Tools For Pressure Die Casting

BACK       TOP

• Hardening & Tempering

• Stress Relieving

• Nitreg® Gas Nitriding

• ONC® In-process Post-Nitriding

• Oxidizing

• Subzero Processing
  
  

BACK       TOP

Introduction

Vacuum
Our two vacuum furnaces are a smaller 6-bar unit, 24” x 36” x 24” (0.6m x 0.9m x 0.6m), and a large 2-bar, with a work zone of 48” x 72” x 36” (1.2m x 1.8m x 0.9m). We are also in the process of installing a vacuum furnace with an oil quench, which will also be able to perform vacuum carburizing. Various vacuum processing methods are described in our technical pages under “Vacuum Treatments” and “Modern Surface Treatments”.

Additional Services

Auxiliary Capabilities
The plant offers various supplementary capabilities that are linked with its core processes, such as tempering, cryogenic freezing, sandblasting, straightening. Various forms of annealing, stress relief or precipitation hardening is performed with or without protective atmospheres, as desired by our customers. Some of these techniques are described under “Other Treatments”.

Laboratory
Our lab is staffed with a degreed metallurgist and it is fully equipped for sample preparation and metallographic evaluations.

Trucking
We have several large trucks on the road every day, with regular routes throughout the Northern Illinois region.

Approvals

BACK       TOP

Our equipment is organized in three groups, as described below, with auxiliary equipment scattered strategically through the plant.

Vacuum
Two of our four vacuum furnaces have gas quench capability, while in the other two we quench with oil. In our equipment we vacuum treat (“Vacuum Treatments”) as well as vacuum carburize (“Modern Surface Treatments”).

Conventional
Two atmosphere furnaces are used for carburizing, carbonitriding, conventional quench, and other related processes (“Conventional Heat Treatments”).

Additional Services

Auxiliary Capabilities
The plant offers various supplementary capabilities that are linked with its core processes, such as tempering, cryogenic freezing, sandblasting, straightening. Various forms of annealing, stress relief or precipitation hardening is performed with or without protective atmospheres, as desired by our customers. Some of these techniques are described under “Other Treatments”.

Laboratory
Our lab is fully equipped for sample preparation and metallographic evaluations.

Trucking
We have the ability to pick up and deliver small and medium-sized loads within approximately 150 mile diameter circle that includes Indianapolis and Columbus, IN. Furthermore, we cultivate relationships with multiple trucking companies that provide excellent and affordable service throughout the US. Our facility is only 30 miles from the Indianapolis Airport and it is very easy to get to by car via I-65.

Approvals

We have maintained AS9100, ISO and NADCAP approvals in good standing for many years.

BACK       TOP

"NITREX INC. - Nevada Operations"
(Nevada Corporation)
201 E. Mayflower Ave.
North Las Vegas, NV 89030

Contact: Dennis Wang or Scott Frank

email: nevada@nitrex.com

Tel: 702-399-1554   ▪   Fax 702-639-3819

_____________________________

Introduction

Nitrex – Nevada opened for business in January 2009 and it aims to be the best heat treat shop in the South-West. We are located in a custom-built new facility in North Las Vegas, with a view of the surrounding hills, and in close proximity to Freeway 15. Large sums of money and a lot of time are spent to install the best possible equipment and set up the best possible practices. The plant will offer a great variety of processing capabilities with a firm objective to tackle the most technically challenging products.

Equipment & Processes

Our equipment is organized in three groups, as described below, with auxiliary equipment scattered strategically through the plant.

Nitriding. The group currently comprises three cylindrical, vertically loaded furnaces with work-zones measuring 63”dia x 98” (Ø1.6m x 2.5m), 47”dia x 126” (Ø1.2m x 3.2m), and 30”dia x 36” (Ø0.8m x 0.9m). The equipment is capable of running the following processes: Nitreg®, Nitreg®-C, Nitreg®-S, ONC®, and Nano-S™. Processing methods are described in detail under “Modern Surface Treatments”. We comply with AMS 2759/10 and AMS 2759/12.

Vacuum. We are in the process of installing a vacuum furnace with integral oil quench capability. In its work-zone of 24” x 36” x18” (0.6m x 0.9m x 0.45m) we can vacuum treat (“Vacuum Treatments”) as well as vacuum carburize (“Modern Surface Treatments”) loads up to 1000 lb. Depending on customers’ requirements we plan to install additional vacuum furnace with gas quench capabilities.

Conventional. One atmosphere furnace with 1500 lb (680 kg) load capacity is already installed. We are using it to run carburizing, carbonitriding, conventional quench, and other related processes (“Conventional Heat Treatments”). The furnace is equipped with a modern control system designed by Process Electronic, allowing us to optimize each process to a higher degree than had been previously possible.

Additional Services

Auxiliary Capabilities. The plant offers various supplementary capabilities that are linked with its core processes, such as tempering, cryogenic freezing, sandblasting, straightening. Various forms of annealing, stress relief or precipitation hardening is performed with or without protective atmospheres, as desired by our customers. Some of these techniques are described under “Other Treatments”.

Laboratory. Our lab is equipped with sample preparation and evaluation equipment which includes a fully automatic microhardness tester, capable of running multiple profiles and saving all results. We also have a salt spray cabinet allowing us to perform salt spray testing in accordance with ASTM-117B specification.

Trucking. We have the ability to pick up and deliver small loads within the Greater Las Vegas area. Furthermore, we cultivate relationships with multiple trucking companies that provide excellent and affordable service throughout the US. Las Vegas is a surprisingly easy place to reach.

Approvals

Nitrex-Nevada is a new facility working towards AS9100, ISO and NADCAP approvals. Our schedule calls for a completion of the above by late 2009.

BACK       TOP